- 8x32 (1-wire) matrix configuration
- Up to 55 V and 1 A (55 W switching power)
- Unlimited switch mechanical lifetime
- Unlimited simultaneous crosspoint connections (nonblocking)
- 400 crosspoints/s switching speed
- Direct SCSI connectivity
 Data Sheet |
Configure System 
View Diagram 
Select one of the following options for product configuration and pricing:
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The National Instruments PXI-2534 high-density solid-state relay (SSR) matrix module features 256 crosspoints in a compact, single-slot, 3U PXI form factor. The NI PXI-2534 is configured as a 4x64 one-wire matrix. Because the module uses SSR technology, it offers unique benefits such as unlimited mechanical lifetime and the ability to route 55 W simultaneously on all channels (unlimited simultaneous connections). These features make the PXI-2534 ideal for routing general-purpose signals in high-density matrix applications.
Connecting Signals to the PXI-2534
The PXI-2534 breaks out switch connections into a single 68-pin SCSI connector. You can connect signals to the PXI-2534 using the NI TB-2637 front-mounting terminal block. For remote connectivity, you can use the NI SH68-68S cable, which connects to a remote, DIN-rail-mountable terminal block (NI TBX-68). Both methods provide screw-terminal connectivity.
NI Switch Executive Switch Management Software
NI Switch Executive is an intelligent switch management and routing application. With NI Switch Executive, you gain increased development productivity by interactively configuring and naming switch modules, external connections, and signal routes. You also increase test code reuse and system performance with switch programming in conjunction with NI TestStand, LabVIEW, and Measurement Studio. These features are especially important when using high-density switch modules such as the PXI-2534. Ultimately, NI Switch Executive simplifies switch system configuration and increases test performance, lowering your cost to test.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PXI |
|---|
| OS Support | Windows, Real-Time |
|---|
| LabVIEW RT Support | Yes |
|---|
| Switch Type | Matrix |
|---|
| Relay Type | SSR |
|---|
| Connectivity | Cables, Connector Block, Terminal Block |
|---|
| Product Certifications | C-Tick, CAN/CSA, CE, FCC, FCC Part 15, IEC, UL - Product Safety |
|---|
| Input Characteristics | |
|---|
| Matrix Configurations | 8x32, 1-wire |
|---|
| Maximum Switching Voltage DC (Pollution Degree 2) | 55 VDC |
|---|
| Maximum Switching Voltage AC | 30 Vrms |
|---|
| Maximum Switching Current | 1 A |
|---|
| Maximum Carry Current | 1 A |
|---|
| Maximum Switching Power | 55 W |
|---|
| Bandwidth | 2 MHz |
|---|
| Relay Count Tracking | Yes |
|---|
| Voltage Category | CAT I |
|---|
| Path Resistance (Typical) | 1 Ohm |
|---|
| Thermal EMF | 2 µV |
|---|
| Dynamic Characteristics | |
|---|
| Scan Rate | 400 cycles/s |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | No |
|---|
| Triggering | Digital |
|---|
| External Clocking | No |
|---|
| Physical Specifications | |
|---|
| Length | 16 cm |
|---|
| Width | 10 cm |
|---|
| Height | 2 cm |
|---|
| I/O Connector | 68-pin SCSI type |
|---|
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
- Installation and integration test of all individual hardware
- Courtesy installation of system driver sets and application development environments
- Three-year warranty and calibration coverage
- Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
