- Connect signal wires directly to the module
- Order as a spare or for multiple devices
- Direct connect terminal modules include connector(s)
- NI 9971 shown in image
All National Instruments C Series spring and screw terminal modules are shipped with the connectors you need. You can purchase module accessories for spare or extra connectors or for augmented strain relief.
The NI 9229 and NI 9239 four-channel analog input modules use one 2-position connector per channel. Both of these modules include the four connectors needed to connect signals out of the box.
NI 9976 - The NI 9976 connector kit contains 10 extra 2-position connectors for modules such as the NI 9229 and NI 9239. Each of these modules is shipped with four connectors, so purchase the NI 9976 to reduce the wiring needed on multiple devices or as replacement spares.
NI 9971 - The NI 9971 provides strain relief and operator protection from high-voltage signals for any 2-position module. It is a backshell kit for use with the NI 9976 2-position connector, and is not shipped with the module kit. The NI 9971 kit includes six backshells. It does not include any connectors.
Additional Product Information
Specifications Documents
Specifications Summary
|
