Up to 80 oz-in. (0.42 lb-ft) holding torque 1.8 deg resolution Single shaft for open loop or dual shaft for closed loop with encoder Ability to match with NI stepper drives and motion controllers for best performance
Data Sheet
National Instruments stepper motors offer high torque, precision, and easy connectivity to NI stepper motor drives. You can quickly develop your precision stepper motion control system by combining the NI stepper motors with NI Motion Assistant, LabVIEW, motion controllers, and matched stepper drives.
You have selected the United States as the country where you will use the product(s) (change ).
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
General
Operating System / Target Any
LabVIEW RT Support Yes
Motion Hardware Motor
Number of Axes 1
Motor/Axis Type stepper
Motor Specifications
NEMA Size 17
Holding Torque (standard units) 43 oz-in, 62 oz-in, 80 oz-in
Holding Torque (metric units) 0.3 N-m, 0.44 N-m, 0.56 N-m
Maximum Revolutions Per Minute 3000 RPM
Resolution 1.8 degree
Single/Dual Shaft single, dual
Winding Type 4-wire Parallel
Phase Resistance 5.19 Ohm, 5.25 Ohm, 6.51 Ohm
Phase Current 1 A, 1.1 A
Inductance 7.7 mH, 11 mH, 12 mH
Physical Specifications
Length 42.7 mm
Width 42.7 mm
Height 35.1 mm, 35.6 mm, 41.2 mm, 41.7 mm, 49.1 mm, 49.6 mm
Weight 200 gram, 260 gram, 340 gram