To use the NI PXIe-6537 , you need all items in the diagram below. Select Option 1 if you already own a PXI System, or Option 2 if you do not already own a chassis, controller, or software.
Roll over the icons below to learn why you need each item in the system
PXI System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Connector Block
|
|
1 Cable
|
|
NI PXIe-6537
|
|
Chassis
|
|
Controller
|
|
Software
|
|
NI PXIe-6537 and Accessories Only
|
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
The chassis provides rugged, modular housing for the controller and modules and contains the high-performance PXI backplane, which includes the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your PXI modules.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
