The NI 9229 is a 4-channel, 24-bit C Series analog input module for use in any NI CompactDAQ or CompactRIO chassis. Designed to be both high-speed and accurate, the NI 9229 is an effective general-purpose analog module because of its resolution, sample rate, and input range.
With channel-to-channel isolation, your entire system, including the device under test, is protected from harmful voltage spikes up to the isolation rating. In addition to safety, isolation eliminates measurement errors caused by ground loops because the front end of the module is floating.
The NI 9229 uses four of the 2-position screw-terminal connectors. The module includes all four connectors, and you can order more as replacements or for easy test equipment changes among devices under test. Those connectors are listed as model NI 9976.
Strain-relief backshells for signal wire security and high-voltage protection (qty 4): NI 9971 Extra connectors for 2-position connector modules (qty 10): NI 9976
EMC Performance
To ensure EMC compliance using BNC connectivity, you must use a ferrite bead, such as NI part number 782801-01.
MINI-COMBICON, 3.5 mm (2-Position)
,
BNC connectors
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
70 °C
Minimum Storage Temperature
-40 °C
Maximum Storage Temperature
85 °C
Timing/Triggering/Synchronization
Triggers cDAQ Chassis
No
NI 9229 Packages
To use the NI 9229 , you need all items in the diagram below. Select Option 1 if you already own a C Series System, or Option 2 if you do not already own a chassis, controller, or software.
Roll over the icons below to learn why you need each item in the system
Create a complete system with the NI 9229 and its accessories. However, the NI 9229 is compatible with multiple C Series Platforms, NI CompactDAQ and CompactRIO. Please review the comparison information below and select a platform to begin configuring your system.
Laboratory - 30 g shock and 0.3 grms operational vibration
Field Work - 50 g shock (Class I, Div 2 for Hazardous Locations)
The chassis provides rugged, modular housing for your controller (if using CompactRIO) and C Series modules. A high-performance backplane in the chassis contains the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your C Series modules. If you are using the NI CompactDAQ platform, then a Personal Computer (PC) will act as the controller of your system. However, if the CompactRIO platform is used then an embedded real-time controller will be used instead.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This device is compatible with a different programming languages depending on the platform used. If you are using the NI CompactDAQ platform then this device is compatible with LabVIEW, C/C++, Visual Basic, and .NET. However, if the CompactRIO platform is used then this device requires the LabVIEW FPGA Module (sold separately), the LabVIEW Real-Time Module (sold separately) and NI-RIO driver software (included with the hardware).
You have selected United States as the country where you will use the product(s)
(change).
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
