- 8 simultaneously sampled analog inputs, 3 MS/s per channel with warp mode enabled (see Overview tab)
- 4 input ranges from ±1.25 to ±10 V and deep onboard memory (16 or 32 MS)
- 8 hardware-timed digital I/O lines; two 24-bit counters; analog and digital triggering
- Direct SMB connectivity with the TB-2709 terminal block
- Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
- Optimized integration with NI LabVIEW, LabWindows™/CVI, and Measurement Studio
 Data Sheet |
Configure System 
- New! Compare to similar products
View Diagram 
Select one of the following options for product configuration and pricing:
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The National Instruments PXI-6133 S Series multifunction data acquisition (DAQ) module features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy. With 3 MS/s per-channel sampling rates, four input ranges from ±1.25 to ±10 V, two 24-bit counter/timers, and eight hardware-timed digital I/O lines, the NI PXI-6133 can be used in a variety of applications, including:
- High-speed, continuous data logging
- Transient and ballistics measurements
- Radar, sonar, ultrasound
- High-energy physics
- IF digitization
Enable Warp Mode to Achieve Maximum Sampling Rates
PXI-6133 analog inputs sample up to 2.5 MS/s using the onboard sample clock; they can also sample up to 3 MS/s using one of the onboard counters or an external reference as the sample clock. Download the LabVIEW example from the Resources tab to enable warp mode and achieve the maximum sampling rates.
Direct Connectivity
The NI TB-2709 provides direct SMB connectivity to the eight PXI-6133 analog inputs. There is also one SMB connector that is programmable for analog or digital triggering, counter/timer functionality, or digital signal routing for device synchronization. In addition to the nine SMB connectors, you can use the MFIT-Pigtail cable to an auxiliary connector for access to onboard counters and digital I/O lines.
Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
For related products and the warp mode example program, visit the Resources tab.
The mark LabWindows is used under a license from Microsoft Corporation.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PXI |
|---|
| OS Support | Windows, Real-Time, Linux |
|---|
| DAQ Product Family | S Series |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 8 SE/8 DI |
|---|
| Sample Rate | 3 MS/s/ch |
|---|
| Resolution | 14 bits |
|---|
| Simultaneous Sampling | Yes |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 4660 µV |
|---|
| Range Sensitivity | 432 µV |
|---|
| Minimum Voltage Range | -1.25..1.25 V |
|---|
| Range Accuracy | 740 µV |
|---|
| Range Sensitivity | 68.8 µV |
|---|
| Number of Ranges | 4 |
|---|
| On-Board Memory | 64 MB |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Hardware |
|---|
| Maximum Clock Rate | 10 MHz |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | Yes |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Number of DMA Channels | 1 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 16 cm |
|---|
| Width | 10 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type |
|---|
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
- Installation and integration test of all individual hardware
- Courtesy installation of system driver sets and application development environments
- Three-year warranty and calibration coverage
- Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
Select your application need to see compatible software options for the NI PXI-6133.
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
|
