The NI PCI-5124 high-resolution digitizer is suited for a wide variety of applications in automotive, communications, scientific research, military/aerospace, and consumer electronics. With a large dynamic range, software-selectable 50 Ω or 1 MΩ input, ranges from 200 mV to 20 V, and ability to acquire more than 1 million waveforms in onboard memory, the PCI-5124 is ideal for both time- and frequency-domain analysis. You can program more than 50 built-in measurement and analysis functions directly from the driver and expand them to more than 400 with NI LabVIEW and LabWindows™/CVI software. The PCI-5124 (32 and 256 MB models only) includes the NI Spectral Measurements Toolkit, which provides additional sophisticated frequency-domain measurements such as power spectrum, peak power and frequency, in-band power, adjacent-channel power, and 3D spectrogram.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
You need a cable to transmit signals to your device.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
You have selected United States as the country where you will use the product(s)
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.