Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXIe-8351

3.0 GHz Dual-Core 1U Rack-Mount PXI Express Controller

  • 3.0 GHz dual-core Pentium D processor 830
  • RAID 0 configurations for high-speed streaming to disk
  • Complete x4 MXI-Express PXI Express remote control kit included
  • Sustained throughput of 798 MB/s; rack-mount slide rails included
  • 160 GB SATA II HDD; 2 gigabit Ethernet ports; 4 Hi-Speed USB ports
  • 512 MB dual-channel DDR2 RAM standard, 4 GB maximum
Data Sheet  |   Configure System popup

The NI PXIe-8351 is a 1U rack-mount PXI Express controller comprised of a 19 in. rack-optimized server-class dual-core computer and bundled with a complete x4 MXI-Express kit for remote control of a PXI Express system with a sustained throughput of 798 MB/s. The NI PXIe-8351 features a Pentium D processor 830 (3.0 GHz dual core), up to 4 GB of dual-channel DDR2 RAM, dual onboard gigabit Ethernet, a 160 GB SATA II hard drive, and optional RAID 0 configurations for high-speed streaming to disk. PXI Express system control is implemented through an installed x4 MXI-Express kit with a 3 m cable.

Redundant Array of Independent Disks (RAID) Configurations
The NI PXIe-8351 offers both RAID 0 (stripped) and RAID 1 (mirrored) configurations with two SATA II hard drives. A RAID 0 configuration increases the rate at which a computer can write data to and read data from disk by evenly distributing data among multiple hard drives, which is beneficial in applications that require high-speed streaming to disk. The NI PXIe-8351 is available with factory-configured RAID 0 configurations of 2 x 160 GB SATA II hard drives or 2 x 250 GB SATA II hard drives.

To configure a complete PXI Express system based on the NI PXIe-8351, visit ni.com/pxiadvisor.

No part number and pricing information available for NI PXIe-8351.

You have selected the United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary


System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Three-year warranty and calibration coverage
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support