Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2595

5 GHz 4x1 Multiplexer

Configure Page for: Print PDF Rich Text
  • 4x1 multiplexer configuration
  • 5 GHz bandwidth
  • Onboard relay counting
  • SMA direct connectivity
  • Excellent insertion loss, VSWR, and isolation specifications
  • 50 Ω characteristic impedance
Compare to similar products
Configure Complete PXI System
Data Sheet

The National Instruments PXI-2595 is a 4x1 high-frequency unterminated multiplexing switch capable of switching signals from DC to 5 GHz. The characteristic impedance of the channels on this module is 50 Ω. The PXI-2595 has a maximum voltage rating of 30 Vrms with a maximum switching current of 500 mA. It is well suited for applications that require the routing of high-frequency signals inside automated test equipment (ATE) systems because it can switch signals with very low insertion loss. In addition, the excellent voltage standing-wave ratio (VSWR) and isolation parameters make this module the perfect choice in any system geared towards high-frequency applications. The PXI-2595 also offers relay count tracking to help reduce unexpected system downtime.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
778572-95 NI PXI-2595 12 - 20 $ 1,599
Step 2: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Other
779674-01 SMA Plug (Female) to SMB Jack (Male) Adapter 12 - 20 $ 59
780895-01 RF Torque Wrench Call $ 159
Software
778546-35 NI Switch Executive Development System + 1 Yr SSP 5 - 10 $ 959.20
Switch Accessories
763444-01 SMA 100 (38.1cm) 10 - 15 $ 79
763443-01 SMA 100 (12.7cm) 10 - 15 $ 69
Step 3: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Family Switches
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Operating System/Target Windows , Real-Time , Linux
LabVIEW RT Support Yes
Triggering Digital
Synchronization Bus (RTSI) Yes
External Clocking No
Length 16 cm
Width 10 cm
Height 2 cm
I/O Connector SMA female
Power Requirement for +3.3V Rail 150 mA
Power Requirement for +5V Rail 0.6 A
Power Requirement for +12V Rail 0 mA
Power Requirement for -12V Rail 0 mA
Slot Two Module No
Module Width 1
MXI Compatible Yes
Product Name PXI-2595
Switches
Switch Type Multiplexer , RF
Max Switching Voltage DC (Pollution Deg. 2) 30 VDC
Maximum Switching Voltage AC 30 Vrms
Max Switching Current 0.5 A
Maximum Carry Current 0.5 A
Maximum Switching Power 10 W
Bandwidth 5 GHz
Relay Type Electromechanical
Relay Count Tracking Yes
Voltage Category CAT I
Product Certifications CAN/CSA , CE , IEC , UL - Product Safety , FCC Part 15 , C-Tick
Path Resistance (Typical) 0.25 Ohm
Scan Rate 45 cycles/s
VSWR Ratio 1.1
VSWR Frequency 1 GHz
Isolation (Typical) 78 dB
Insertion Loss (Typical) 0.4 dB
Terminated No
Characteristic Impedance 50 Ohm
Multiplexer Config Wire Mode 1-wire

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »