- 4 simultaneously sampled analog inputs, 16-bit, 250 kS/s per channel
- 4 simultaneous analog outputs, 16-bit, 250 kS/s per channel
- 60 VDC continuous channel-to-channel isolation
- 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
- 6 digital inputs, 4 digital outputs, two 32-bit counters, digital triggering
- Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
Data Sheet
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The National Instruments PCI-6154 is a channel-to-channel isolated, simultaneous sampling multifunction data acquisition (DAQ) board. It combines the safety of isolation with high-performance timing and calibration technologies and per-channel dedicated analog-to-digital converters (ADCs) to offer extreme reliability, accurate measurements, and precise control. Isolation provides:
- Safety from transients
- Noise rejection
- Reduced ground loops
The NI PCI-6154 features four differential simultaneously sampled 16-bit analog inputs and outputs with channel-to-channel isolation and 250 kS/s sampling. You can combine the channel-to-channel isolated analog outputs to generate signals greater than ±10 V (up to ±40 V by combining all four channels). The PCI-6154 also offers six digital inputs, four digital outputs, two counter/timers, and digital triggering.
Designed to deliver reliable measurements in virtually any environment, the PCI-6154 isolated DAQ board is ideal for a wide variety of applications, including:
- Automotive test
- Industrial monitoring and control
- High-speed continuous data logging
- Measurements requiring synchronization among analog input, analog output, digital I/O, and counter/timer operations
Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.
For additional information and related products, visit the Resources tab.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
| Form Factor | PCI |
| OS Support | Windows, Real-Time |
| Measurement Type | Quadrature encoder |
| DAQ Product Family | S Series |
| LabVIEW RT Support | Yes |
| Isolation Type | Ch-Ch Isolation |
| Analog Input | |
| Number of Channels | 4 DI |
| Sample Rate | 250 kS/s/ch |
| Resolution | 16 bits |
| Simultaneous Sampling | Yes |
| Maximum Voltage Range | -10..10 V |
| Range Accuracy | 5279 µV |
| Range Sensitivity | 105 µV |
| Minimum Voltage Range | -1..1 V |
| Range Accuracy | 686 µV |
| Range Sensitivity | 28 µV |
| Number of Ranges | 4 |
| On-Board Memory | 8190 samples |
| Analog Output | |
| Number of Channels | 4 |
| Update Rate | 250 kS/s |
| Resolution | 16 bits |
| Maximum Voltage Range | -10..10 V |
| Range Accuracy | 7991 µV |
| Current Drive (Channel/Total) | 5 mA |
| Digital I/O | |
| Number of Channels | 6 DI/4 DO |
| Timing | Software |
| Logic Levels | TTL |
| Maximum Input Range | 0..5.25 V |
| Maximum Output Range | 0..5.25 V |
| Input Current Flow | Sinking, Sourcing |
| Programmable Input Filters | No |
| Output Current Flow | Sinking, Sourcing |
| Current Drive (Channel/Total) | 24 mA/96 mA |
| Watchdog Timer | No |
| Supports Programmable Power-Up States? | No |
| Supports Handshaking I/O? | No |
| Supports Pattern I/O? | No |
| Counter/Timers | |
| Number of Counter/Timers | 2 |
| Resolution | 32 bits |
| Maximum Source Frequency | 80 MHz |
| Minimum Input Pulse Width | 25 ns |
| Logic Levels | TTL |
| Maximum Range | 0..5 V |
| Timebase Stability | 50 ppm |
| GPS Synchronization | No |
| Pulse Generation | Yes |
| Buffered Operations | Yes |
| Debouncing/Glitch Removal | No |
| Number of DMA Channels | 4 |
| Timing/Triggering/Synchronization | |
| Synchronization Bus (RTSI) | Yes |
| Triggering | Digital |
| Physical Specifications | |
| Length | 15.6 cm |
| Width | 9.8 cm |
| I/O Connector | 37-pin D-Sub |
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
Select your application need to see compatible software options for the NI PCI-6154.
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availab |