The National Instruments NI PXI-2584 is a high-voltage multiplexer switch in a single-slot, 3U PXI module. With a 300V CAT II certification, it is capable of routing general-purpose ATE loads or high-voltage, low-current signals. The 600V CAT I channel-to-ground isolation on the NI PXI-2584 makes it ideal for fuel cell and battery stack applications. The module uses an ‘interleaved’ topology which maximizes channel count when measuring potentials on a battery stack or fuel cells. This is done by putting each single input pin on the front connector points in between potentials on the stack which help extends channel count from 6 to 11 2-wire channels. The module can also be used in multi-module configurations for taking measurements on hundreds of channels. The 600V CAT I and 300V CAT II safety ratings combined with UL safety certification make it ideally suited for high-voltage ATE systems which include the NI PXI-4071 1000V DMM. The reed relays in the PXI-2584 also ensure longer lifetimes and faster actuation times for test equipment.
NOTES: 1) The NI PXI-2584 shall not be connected to MAINs CAT II, III, or IV circuits above 300V. See the product Specifications for proper installation and restrictions for safe use of the NI PXI-2584, and explanation of measurement categories (CAT). 2) The NI PXI-2584 is not EMC emissions protected. See the product Specifications for proper installation and controls for EMC suppression.
Choose from hundreds of specialized instruments to create a PXI System that suits your measurement needs and can scale for future applications. Then, we'll help you choose the right hardware and software to complete your configuration.
Add More Measurements and I/O Modules Use the PXI Advisor to choose from a variety of modules including analog I/O, digital I/O, switching and more. Then, complete and price the PXI System.
Preview a Complete System View and price a complete PXI configuration including the NI PXI-2584, chassis, and controller. Starting from the default configuration, you can add modules, accessories, and software and customize your system.
The chassis provides rugged, modular housing for the controller and modules and contains the high-performance PXI backplane, which includes the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your PXI modules.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
You have selected United States as the country where you will use the product(s)
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.