The NI PXIe-1062Q 8-slot chassis, designed for a wide range of test and measurement applications, provides a high-bandwidth backplane with up to 1 GB/s per-slot dedicated bandwidth to meet high-performance needs. The NI PXIe-1062Q has four PXI peripheral slots, one PXI Express slot with system timing capabilities, and two PXI Express hybrid slots that accept both PXI and PXI Express peripheral modules.
The NI PXIe-1062Q chassis operates over a 0 to 55 ºC temperature range and holds acoustical noise as low as 43.6 dBA at temperatures below 30 ºC. It incorporates all of the features of the latest PXI specification, accepting both PXI and PXI Express modules. The chassis features a built-in 10 MHz reference clock, PXI trigger bus, and PXI star trigger for PXI modules as well as a built-in 100 MHz reference clock, SYNC 100, and PXI differential star trigger for PXI Express modules. Providing more than 3 GB/s total system bandwidth, this high-performance chassis can meet a variety of high-throughput application needs.
Remote Power Inhibit Control and Voltage Monitoring
Yes
Total Available Power
354 W
Input Voltage Range
100 V
-
240 V
Input Frequency Range
50 Hz
-
60 Hz
Field-replaceable Power Supply
Yes
Auto Fan Sound Pressure Level
43.6 dBA
Auto Fan Sound Power
52.8 dBA
High Fan Sound Pressure Level
62 dBA
High Fan Sound Power
72 dBA
Auto/High Fan Selector
Yes
Number of Fans
2
Fan Capacity
110 cfm
Per-slot Cooling Capacity
110 cfm
Physical Specifications
Length
39.65 cm
Width
27.14 cm
Height
17.71 cm
I/O Connector
BNC connectors
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
55 °C
Maximum Altitude
2000 m
You have selected United States as the country where you will use the product(s)
(change).
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
