Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-5922

24-Bit Flexible-Resolution Digitizer

Configure Page for: Print PDF Rich Text
  • 24-bit resolution up to 500 kS/s, ranging to 16 bits at 15 MS/s
  • 2 simultaneously sampled channels
  • Up to 114 dBc SFDR
  • -120 dBFS rms noise
  • Integrated antialias protection for all sampling rates
  • Deep onboard memory - 8 MB/ch standard, up to 256 MB/ch
Data Sheet


The NI PCI-5922 is a dual-channel flexible-resolution digitizer with the highest resolution and highest dynamic range of any digitizer on the market. It maximizes vertical resolution based on the selected sample rate, from 24 bits at rates up to 500 kS/s to 16 bits at 15 MS/s. This unparalleled flexibility and resolution are achieved with NI Flex II ADC technology, which uses an enhanced multibit delta-sigma converter and patented techniques for linearization. By combining the PCI-5922 with software such as NI LabVIEW, you can define functionality to create different instruments, such as DC and rms voltmeters, audio analyzers, frequency counters, spectrum analyzers, IF digitizers, and I/Q modulation analyzers, with measurement performances that exceed that of high-end traditional instruments with similar functionality.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Family Digitizers/Oscilloscopes
Form Factor PCI
Part Number 779659-02 , 779659-03 , 779659-01
Operating System/Target Linux , Windows , Real-Time
LabVIEW RT Support Yes
Triggering Digital , Analog
Synchronization Bus (RTSI) Yes
External Clocking No
Length 35.5 cm
Width 2 cm
Height 11.3 cm
I/O Connector SMB male , BNC connectors
Product Name PCI-5922
Analog Input
Channels 2
Resolution 24 bits
Simultaneous Sampling Yes
Sample Rate 15 MS/s
Bandwidth 6 MHz
Input Impedance 50 Ohm , 1 MOhm
Maximum Common Mode Voltage 42 V
On-Board Memory 256 MB/ch
Frequency Range 0 Hz - 6 MHz
Max Voltage -5 V - 5 V
Maximum Voltage Range Sensitivity 596 nV
Minimum Voltage Range -1 V - 1 V
Supports Alias Protected Decimation? No
Provides Digital Down Conversion? No
Spurious-Free Dynamic Range 114 dBc
Total Harmonic Distortion (THD) -112 dBc
Signal-to-Noise-and-Distortion Ratio (SINAD) 105 dB
Phase Noise -133 dBc/Hz
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0

NI PCI-5922 Complete Package

Each NI PCI-5922 requires:
1 Cable NI PCI-5922 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-5922 and Accessories

Hardware Subtotal: $ 10,225
NI PCI-5922
779659-02 Qty $ 10,130 each
779659-01 Qty $ 8,430 each
779659-03 Qty $ 12,900 each
Required Accessories
Cable - Unshielded
Qty $ 95 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 12 - 20
Package Price: $ 10,225
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
You need a cable to transmit signals to your device.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »