Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-5651

RF Signal Generator With Modulation Capability

Configure Page for: Print PDF Rich Text
  • Ability to use with NI PXI-5660 RF vector signal analyzer for stimulus response applications
  • Less than 2 ms frequency sweep tuning speed typical
  • Less than 1 ppb frequency resolution
  • -110 dBc/Hz phase noise at 1 GHz, 10 kHz offset typical
  • FM, 2-FSK, OOK modulation
  • 500 kHz to 3.3 GHz frequency range
Configure Complete PXI System
Data Sheet


The NI PXI-5651 RF signal generator is continuous-wave with modulation capability. In a single 3U PXI slot, the PXI-5651 signal generator provides exceptional phase noise and signal jitter. With the PXI-5651 3.3 GHz RF signal generator, you can easily set up sophisticated stimulus response or tracking generator applications using the NI PXI-5660 RF vector signal analyzer (VSA) and the NI LabVIEW graphical development environment.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Family RF
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Part Number 778768-02 , 779670-01
Operating System/Target Windows
Triggering Digital
Synchronization Bus (RTSI) No
External Clocking Yes
Length 16 cm
Width 10 cm
Height 2 cm
I/O Connector SMA female
Power Requirement for +3.3V Rail 0.4 A
Power Requirement for +5V Rail 0.5 A
Power Requirement for +12V Rail 0.52 A
Power Requirement for -12V Rail 0.08 A
Slot Two Module No
Module Width 1
MXI Compatible Yes
Product Name PXI-5651
RF
RF Product Type RF Signal Generators
Minimum Frequency 500 kHz
Maximum Frequency 3.3 GHz
Analog Input
Channels 0
Analog Output
Channels 1
Timing Hardware
Output Impedance 50 Ohm
On-Board Memory 1024 bits
Frequency Range 500 kHz - 3.3 GHz
Waveform Types Intermediate Frequency , RF
Provides Data Bit Marker? No
Supports Linking/Looping Segments? No
Supports Frequency Hopping and Sweeping? Yes
Supports Modulation? No
Real-Time Bandwidth (RF only) 8 MHz
Noise Floor (@ -50 dBm output) -140 dBm/Hz
Phase Noise -110 dBc/Hz
Supports Data Streaming? No
Supports On-the-fly signal adjustments? Yes
RF Power Range -110 dBm - 13 dBm
Digital I/O
Bidirectional Channels 0

NI PXIe-5651 Complete Package

Each NI PXIe-5651 requires:
1 Cable NI PXIe-5651 Software

Roll over icons above to learn why you need each item in the package.

NI PXIe-5651 and Accessories

Hardware Subtotal: $ 5,990
NI PXIe-5651
781216-01 Qty $ 5,990 each
779670-01 Qty $ 5,990 each
 
Optional Accessories Hide
Qty $ 850 each
Estimated Shipping Days: 12 - 20
Package Price: $ 5,990
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
You need a cable to transmit signals between your device and an external module.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »