Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-5650

RF Signal Generator with Modulation Capability

Print Configure page for PDF
  • Ability to use with NI PXI-5660 RF vector signal analyzer for stimulus response applications
  • Less than 2 ms frequency sweep tuning speed typical
  • 500 kHz to 1.3 GHz frequency range
  • -110 dBc/Hz phase noise at 1 GHz, 10 kHz offset typical
  • FM, 2-FSK, OOK modulation
  • Less than 1 ppb frequency resolution
  • Data Sheet  |   Configure System popup

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
779670-00 NI PXI-5650 -- For price, select country  

Each NI PXI-5650 requires: 1 Cable

NI PXI-5650 Cable
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
763444-01 SMA100 (45cm)
NI Recommended		 -- For price, select country  
763443-01 SMA100 (15cm) -- For price, select country  
778567-01 RF Accessory Pack -- For price, select country  
Step 3: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The National Instruments PXI-5650 RF signal generator is continuous-wave with modulation capability. In a single 3U PXI slot, the NI PXI-5650 signal generator provides exceptional phase noise and signal jitter. With the PXI-5650 1.3 GHz RF signal generator, you can easily set up sophisticated stimulus response or tracking generator applications using the NI PXI-5660 RF vector signal analyzer and the National Instruments LabVIEW graphical development environment.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents


Specifications Summary

General 
Form FactorPXI
OS SupportWindows
Analog Input 
Number of Channels0
Analog Output 
Number of Channels1
TimingHardware
Frequency Range100 kHz..1.3 GHz
Real-Time Bandwidth (RF only)8 MHz
Output Impedance50 Ohm
Maximum On-Board Memory 1024 bits
Waveform TypesIntermediate Frequency, RF
Provides Data Bit Marker?No
Supports Linking/Looping Segments?No
Supports Frequency Hopping and Sweeping?Yes
Supports Data Streaming?No
Supports On-the-fly signal adjustments?Yes
Supports Modulation?No
Dynamic Range -75 dBc
Noise Floor (@ -50 dBm output)-140 dBm/Hz
Phase Noise (@ 10 kHz offset)-110 dBc/Hz
Power Range (RF only)-110..13 dBm
Digital I/O 
Number of Channels0
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)No
T-clock CapabilityNo
TriggeringDigital
External ClockingYes
Physical Specifications 
Length16 cm
Width10 cm
Height2 cm
I/O ConnectorSMA female

View Pricing and Purchasing Information »

Factory Installation

Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:

  • Installation of all individual hardware and software components as well as full testing to eliminate conflicts
  • Custom documentation plus a custom restore and startup utility
  • 2-year warranty and calibration coverage

This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

  • You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
  • Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
  • View your RMA support request status online
  • Register your product

Technical Support

www.ni.com/support

View Pricing and Purchasing Information »

Select your application need to see compatible software options for the NI PXI-5650.

Application Need

Graphical Programming Text-Based Programming
Option 1: Select one of the following NI Developer Suite packages or Configure Your NI Developer Suite >>
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change)		 Qty
Pre-configured NI Developer Suite Packages
DS410841 NI Developer Suite Core with Automated Test Option (English)
NI Recommended		 -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Option 2: Select any of the following software products
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
LabVIEW Software
776670-09 NI LabVIEW Full Development System for Windows (English) -- For price, select country  
Specialty Software
777777-09 NI TestStand Development System for Windows -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Option 1: Select one of the following NI Developer Suite packages or Configure Your NI Developer Suite >>
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change)		 Qty
Pre-configured NI Developer Suite Packages
DS410841 NI Developer Suite Core with Automated Test Option (English)
NI Recommended		 -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Option 2: Select any of the following software products
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Application Software
776800-09 LabWindows/CVI Full Development System for Windows -- For price, select country  
Specialty Software
777777-09 NI TestStand Development System for Windows -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Other compatible software: ANSI C/C++, Java, Visual Basic .NET
Graphical Programming Text-Based Programming
Select any of the following software products
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
LabVIEW Software
776670-09 NI LabVIEW Full Development System for Windows (English)
NI Recommended		 -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Select any of the following software products
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Application Software
776800-09 LabWindows/CVI Full Development System for Windows
NI Recommended		 -- For price, select country  

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

Other compatible software: ANSI C/C++, Java, Visual Basic .NET

Driver Software

View Pricing and Purchasing Information »

Back to top »