NI PCI-73904-Axis Controller for PCI with Isolation |
The National Instruments PCI-7390 is a position (pulse) command stepper motion controller with isolation designed for use with drives thataccept position (p-) command mode or step (pulse) command input. TheNI PCI-7390 has accessories specifically designed for direct connectivityto Yaskawa Sigma II, Mitsubishi MR-J2S, and Panasonic Minas A drives. The PCI-7390 provides fully programmable motion control for up to fourindependent or coordinated axes of motion. It features dedicated motionI/O for limit and home switches and additional I/O for general-purposefunctions such as in-position, inhibit input/drive alarm, and servo ready.You can use the PCI-7390 controller for point-to-point and straight-linevector moves. The PCI-7390 also performs arbitrary and complex motion trajectories through circular, spherical, or helical interpolation. The PCI-7390 uses quadrature encoders for position and velocity feedback (closed-loop only) and provides advanced encoder functions such as trigger (position capture) and breakpoint (position compare). Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Technical Support |
