The National Instruments MCA-7790 adapters include an accessory and a cable to connect popular drives directly to the NI PCI-7790 4-axis position (pulse) command motion controller. To connect a Yaskawa Sigma II drive to the NI PCI-7390, connect a 50-pin cable from the drive to the MCA-7790Y, and an SCSI 100-pin cable (included) from the MCA-7790Y to the PCI-7390. To connect a Panasonic Minas A drive to the PCI-7390, connect a 50-pin cable from the drive to the MCA-7790P, and an SCSI 100-pin cable (included) from the MCA-7790P to the PCI-7390. To connect a Mitsubishi MR-J2S drive to the PCI-7390, connect two 20-pin cables from the drive to the MCA-7790M, and an SCSI 100-pin cable (included) from the MCA-7790M to the PCI-7390. The MCA-7790 requires a 24 V power supply.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
