The National Instruments APS-4100 is an auxiliary power source for NI PXI-4110 programmable power supply modules. When the PXI backplane power source is not sufficient for a power supply module, you can use the NI APS-4100 as an auxiliary power source to drive the outputs of the power supply module. The APS-4100 comes terminated with a 2-pin connector that mates to the front of the PXI-4110 module, making it easy to connect to the system. The output of the auxiliary power source is 12 V and up to 5 A or 60 W. Input power can range from 100 to 240 VAC and 47 to 63 Hz, making it suitable for use around the world.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
