USB High-Speed M Series Multifunction DAQ

  • Print
  • PDF
  • Rich Text
  • 16-bit, up to 1.25 MS/s, up to 80 analog input channels
  • 16-bit, up to 2.8 MS/s, up to 4 analog output channels
  • Up to 48 digital I/O (up to 32 at up to 1 MHz); 32-bit counters
  • Screw, 68-pin, or BNC connectivity
  • NI signal streaming for bidirectional high-speed data streams over USB
  • High-performance NI-DAQmx driver software and LabVIEW SignalExpress LE included

The M Series is the next generation of multifunction data acquisition (DAQ) devices from National Instruments. NI M Series technologies, including the NI-STC 2 system controller, the NI-PGIA 2 amplifier, and NI-MCal calibration technology, provide more performance, more accuracy, and more I/O than other data acquisition devices. The new USB M Series modules combine M Series performance with Hi-Speed USB ease of use to handle a wide range of applications including automated test, process control, and sensor measurements.

Unlike typical multifunction USB data acquisition devices, NI USB M Series DAQ devices incorporate NI signal streaming, a patent-pending technology that combines three innovative hardware- and software-level design elements to enable sustained high-speed and bidirectional data streams over USB.

The NI USB-6251, USB-6255, and USB-6259 devices are available in a board-only design specifically for OEM applications. Follow the OEM link below for more information.