Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9205

32-Ch ±200 mV to ±10 V, 16-Bit, 250 kS/s Analog Input Module

Configure Page for: Print PDF Rich Text
  • 32 single-ended or 16 differential analog inputs
  • 16-bit resolution; 250 kS/s aggregate sampling rate
  • ±200 mV, ±1, ±5, and ±10 V programmable input ranges
  • Hot-swappable operation; overvoltage protection; isolation; NIST-traceable calibration
  • -40 to 70 °C operating range
  • Spring terminal or D-Sub connectivity
Compare to similar products
Configure Complete CompactRIO or CompactDAQ System
View Data Sheet and Specifications

The National Instruments 9205 is a C Series module, for use with NI CompactDAQ and CompactRIO chassis. The NI 9205 features 32 single-ended or 16 differential analog inputs, 16-bit resolution, and a maximum sampling rate of 250 kS/s. Each channel has programmable input ranges of ±200 mV, ±1, ±5, and ±10 V. To protect against signal transients, the NI 9205 includes up to 60 V of overvoltage protection between input channels and common (COM). In addition, the NI 9205 also includes a channel-to-earth-ground double isolation barrier for safety, noise immunity, and high common-mode voltage range. It is rated for 1,000 Vrms transient overvoltage protection.

There are two connector options for the NI 9205; a 36-position spring terminal connector for direct connectivity or a 37-position D-Sub connector. To add strain relief and high-voltage protection to the 36-position terminal of the NI 9205, NI recommends the NI 9940 strain-relief connector accessory.

The NI 9205 with D-Sub option has an industry-standard 37-position D-Sub connector that provides a low-cost cabling option to a wide variety of accessories available from NI or other vendors. A number of vendors who provide custom D-Sub cable fabrication services, can provide cables with a pin-out that matches your exact application needs. The NI 9933 (or other 37-pin D-Sub connector) is required for use with the NI 9205 with D-Sub. The NI 9933 includes a screw-terminal connector with strain relief as well as a D-Sub solder cup backshell for creating custom cable assemblies.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI 9205      
779519-01 Module Only (Spring Terminal)
NI Recommended		 1 - 2 $ 799
779357-01 Module Only (D-Sub Connector) 1 - 2 $ 699
780173-01 Module with Conformal Coating (D-Sub Connector) Call $ 1,099

Each NI 9205 requires: 1 Connectivity Accessory

NI 9205 Connectivity Accessory
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779567-01 NI 9940 Backshell for 36-pos connector block (qty 1)
NI Recommended		 1 - 2 $ 29
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Connectivity Accessories
196740-01 NI 9974 36-pos spring term connector block (qty 1) 5 - 10 $ 39
Step 4: Add to Cart or Get a Quote
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779103-01 NI 9933 37pin D-Sub connector kit
NI Recommended		 1 - 2 $ 149
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Cable
778621-01 SH37F-37M-1 37-Pin Female to Male Shielded I/O Cable, 1 m 5 - 10 $ 29
778621-02 SH37F-37M-2 37-Pin Female to Male Shielded I/O Cable, 2 m 5 - 10 $ 39
778620-04 SH37F-P-4 37-Pin Female to Pigtail Shielded I/O Cable, 4 m 5 - 10 $ 29
778673-01 CB-37FH Horizontal DIN Rail Mount 5 - 10 $ 59
778672-01 CB-37FV Vertical DIN Rail Mount 5 - 10 $ 109
779353-01 CB-37F-LP 5 - 10 $ 39
779491-01 CB-37F-HVD 5 - 10 $ 169
Step 4: Add to Cart or Get a Quote
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779103-01 NI 9933 37pin D-Sub connector kit
NI Recommended		 1 - 2 $ 149
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Cable
778621-01 SH37F-37M-1 37-Pin Female to Male Shielded I/O Cable, 1 m 5 - 10 $ 29
778621-02 SH37F-37M-2 37-Pin Female to Male Shielded I/O Cable, 2 m 5 - 10 $ 39
778620-04 SH37F-P-4 37-Pin Female to Pigtail Shielded I/O Cable, 4 m 5 - 10 $ 29
778673-01 CB-37FH Horizontal DIN Rail Mount 5 - 10 $ 59
778672-01 CB-37FV Vertical DIN Rail Mount 5 - 10 $ 109
779353-01 CB-37F-LP 5 - 10 $ 39
779491-01 CB-37F-HVD 5 - 10 $ 169
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Name NI 9205
Product Family Industrial I/O
Form Factor CompactDAQ , CompactRIO
Operating System/Target Windows , Real-Time
Measurement Type Voltage
Isolation Type Ch-Earth Ground Isolation
RoHS Compliant No
Product Name NI 9205 D-Sub
Product Family Industrial I/O
Form Factor CompactDAQ , CompactRIO
Operating System/Target Windows , Real-Time
Measurement Type Voltage
Isolation Type Ch-Earth Ground Isolation
RoHS Compliant No
Analog Input
Channels 32 , 16
Single-Ended Channels 32
Differential Channels 16
Resolution 16 bits
Sample Rate 250 kS/s
Max Voltage 10 V
Maximum Voltage Range -10 V , 10 V
Maximum Voltage Range Accuracy 6220 µV
Minimum Voltage Range -0.2 V , 0.2 V
Minimum Voltage Range Accuracy 157 µV
Simultaneous Sampling No
Channels 32 , 16
Single-Ended Channels 32
Differential Channels 16
Resolution 16 bits
Sample Rate 250 kS/s
Max Voltage 10 V
Maximum Voltage Range -10 V , 10 V
Maximum Voltage Range Accuracy 6220 µV
Minimum Voltage Range -0.2 V , 0.2 V
Minimum Voltage Range Accuracy 157 µV
Simultaneous Sampling No
Analog Output
Channels 0
Channels 0
Digital I/O
Bidirectional Channels 0
Input-Only Channels 0
Output-Only Channels 0
Number of Channels 0 , 0 , 0
Bidirectional Channels 0
Input-Only Channels 0
Output-Only Channels 0
Number of Channels 0 , 0 , 0
Counter/Timers
Counters 0
Counters 0
Physical Specifications
Length 9 cm
Width 2.3 cm
I/O Connector 36-position spring terminal
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 70 °C
Minimum Storage Temperature -40 °C
Maximum Storage Temperature 85 °C
Length 9 cm
Width 2.3 cm
I/O Connector 37-pin D-Sub
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 70 °C
Minimum Storage Temperature -40 °C
Maximum Storage Temperature 85 °C

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »


What is Conformal Coating?

Conformal coatings are specially formulated thin film materials that are applied directly to circuit boards or circuit card assemblies (CCAs). These films provide environmental protection for components and circuitry. The thin film materials used for conformal coating are normally applied using a process of dipping or spraying the CCA with a liquid or resinous material. As the material dries, it forms a resilient coating that can protect against moisture, mold, dust, corrosion and other environmental stresses.

Interested in Conformal Coating options with this module? Click one of the options below:



View Pricing
View More Information

View Pricing and Purchasing Information »

Back to top »