NI 92038-Ch ±20 mA, 200 kS/s, 16-Bit Analog Current Input Module |
The NI 9203 is a C Series data acquisition module includes eight analog current input channels for high-performance control and monitoring applications. The NI 9203 features programmable input ranges of ±20 mA or 0 to 20 mA, 16-bit resolution, and a 200 kS/s maximum sampling rate. The NI 9203 also provides open-loop detection that is programmed using LabVIEW software. To protect against signal transients, the NI 9203 includes a channel-to-earth ground double isolation barrier (250 Vrms isolation) for safety and noise immunity.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related InformationSpecifications Summary
System Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportWhat is Conformal Coating? Conformal coatings are specially formulated thin film materials that are applied directly to circuit boards or circuit card assemblies (CCAs). These films provide environmental protection for components and circuitry. The thin film materials used for conformal coating are normally applied using a process of dipping or spraying the CCA with a liquid or resinous material. As the material dries, it forms a resilient coating that can protect against moisture, mold, dust, corrosion and other environmental stresses.Interested in Conformal Coating options with this module? Click one of the options below: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
