Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9472

8-Channel 24 V Logic, 100 µs, Sourcing Digital Output Module

Configure Page for: Print PDF Rich Text
  • 8-channel, 100 µs digital output
  • D-Sub or screw-terminal connector options
  • 6 to 30 V range, sourcing digital output
  • -40 to 70 °C operating range
  • Hot-swappable operation
  • Extreme industrial certifications/ratings
Data Sheet  |   Configure System popup

The National Instruments NI 9472 is an 8-channel, 100 µs sourcing digital output module for any NI CompactDAQ or CompactRIO chassis. Each channel is compatible with 6 to 30 V signals and features 2,300 Vrms of transient overvoltage protection between the output channels and the backplane. Each channel also has an LED that indicates the state of that channel. With the NI 9472, you can connect directly to a variety of industrial devices such as motors, actuators, and relays.

There are two connector options for the NI 9472 - a 10-position screw-terminal connector and a 25-position D-Sub connector. This industry-standard 25-position D-Sub connector provides for low-cost cabling to a wide variety of accessories available from NI or other vendors. A number of vendors with custom D-Sub cable fabrication services can deliver cables with a pinout that matches your exact application needs.

NI recommends the NI 9932 strain relief connector accessory for the NI 9472 when using screw-terminal connectivity and the NI 9934 accessory for 25-position D-Sub connectivity.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI 9472      
779004-01 Screw Terminals
NI Recommended		 1 - 2 $ 99.00
779137-01 D-Sub Connector 1 - 2 $ 99.00
Step 2: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Connectivity Accessories
779017-01 NI 9932 - 10-position strain relief and high-voltage protection connector kit 1 - 2 $ 29.00
779105-01 NI 9936 - 10 screw-terminal plugs for any 10-position screw-terminal module 1 - 2 $ 49.00
Step 3: Add to Cart or Get a Quote
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779104-01 NI 9934 25pin D-Sub connector kit
NI Recommended		 1 - 2 $ 109.00
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
192568-01 SH25F-25M-1 (1m) - 25-Pin Female to Male Shielded I/O Cable, 1 m 5 - 10 $ 29.00
192568-02 SH25F-25M-2 (2m) - 25-Pin Female to Male Shielded I/O Cable, 2 m 5 - 10 $ 29.00
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General 
Form FactorCompactDAQ, CompactRIO
Operating System / TargetWindows, Real-Time
Measurement TypeDigital
Isolation TypeCh-Earth Ground Isolation
Analog Input 
Number of Channels0
Analog Output 
Number of Channels0
Digital I/O 
Number of Channels8 DO
TimingHardware
Maximum Clock Rate10 kHz
Logic LevelsOther
Maximum Output Range6..30 V
Output Current FlowSourcing
Current Drive (Channel/Total)0.75 A/6 A
Supports Handshaking I/O?Yes
Supports Pattern I/O?Yes
Counter/Timers 
Number of Counter/TimersProvided by chassis
Timing/Triggering/Synchronization 
TriggeringDigital
Triggers cDAQ ChassisYes

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Three-year warranty and calibration coverage
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »