The National Instruments USB-9472 is a data acquisition module with integrated signal conditioning that provides plug-and-play connectivity via USB for faster setup and measurements. This device has eight sourcing digital output channels, specifically designed for industrial and control applications. Each channel can source up to 30 V externally powered at 0.75 A, for direct connection to 12 and 24 V systems. With both screw terminal and D-Sub connector options, the NI USB-9472 is ideal for flexible, low-cost signal wiring. In addition, this module includes channel-to-earth ground isolation for safety, noise immunity and high common-mode voltage range.
This USB data acquisition module is compatible with only Microsoft Windows OSs using NI-DAQmx driver software. Browse the information in the Resources tab to learn more about NI-DAQmx or download the driver. This USB data acquisition module is not compatible with the Traditional NI-DAQ (Legacy) driver.
Every NI USB data acquisition module includes a copy of NI LabVIEW SignalExpress LE so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, USB data acquisition modules are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. USB data acquisition modules are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.
For applications that require a higher channel count, consider NI SCXI signal conditioning hardware.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
