The NI PCI-6123 S Series data acquisition (DAQ) board features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and preserved phase relationship among the analog inputs.
The PCI-6123 is a full-length PCI board. Please verify with your PC vendor that there is sufficient room in the computer chassis to house this board. See the KnowledgeBase article in the Resources tab for more information.
Application Software With NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software. NI S Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows/CVI 7.x, Measurement Studio 7.x, LabVIEW SignalExpress 1.x, or LabVIEW with the LabVIEW 7.1 Real-Time Module. S Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.0.
NI-DAQmx Driver Software NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. It controls every aspect of your data acquisition system, from configuration to programming to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably speed up your measurements with optimized DMA data transfer and single-point I/O.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
