Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6132

14-Bit, 2.5 MS/s/ch, Simultaneous Sampling Multifunction DAQ

Configure Page for: Print PDF Rich Text
  • 4 simultaneously sampled analog inputs, up to 2.5 or 3 MS/s in warp mode (see Overview tab)
  • 4 input ranges from ±1.25 to ±10 V
  • Deep onboard memory (16 MS)
  • 8 hardware-timed digital I/O lines; two 24-bit counters; analog and digital triggering
  • Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
  • Optimized integration with NI LabVIEW, LabWindows™/CVI, and Measurement Studio
Data Sheet


The NI PCI-6132 S Series multifunction DAQ board features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy.

The PCI-6132 is a full-length PCI board. Please verify with your PC vendor that the computer chassis has sufficient room to house this board. See the KnowledgeBase article in the Resources tab for more information.

Enable Warp Mode to Achieve Maximum Sampling Rates
PCI-6132 analog inputs sample up to 2.5 MS/s using the onboard sample clock; they can sample up to 3 MS/s using an external reference as the sample clock. Download the LabVIEW example from the Resources tab to enable warp mode and achieve the maximum sampling rates.

Application Software
With NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. NI S Series DAQ devices are compatible with the following versions (or later) of NI application software - LabVIEW 7.x, LabWindows/CVI 7.x, or Measurement Studio 7.x and LabVIEW SignalExpress 1.x. S Series DAQ devices are also compatible with Visual Studio .NET, ANSI C/C++, and Visual Basic 6.0.

NI-DAQmx Driver Software
Quickly gather real-world data with NI-DAQmx driver software featuring measurement-ready virtual channels and configuration abilities using the DAQ Assistant.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Name PCI-6132
Product Family Multifunction Data Acquisition
Form Factor PCI
Part Number 779422-01
Operating System/Target Real-Time , Linux , Windows
LabVIEW RT Support Yes
DAQ Product Family S Series
Measurement Type Quadrature encoder , Digital , Frequency , Voltage
RoHS Compliant No
Analog Input
Channels 4 , 0
Single-Ended Channels 0
Differential Channels 4
Resolution 14 bits
Sample Rate 2.5 MS/s
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 4660 µV
Maximum Voltage Range Sensitivity 432 µV
Minimum Voltage Range -1.25 V - 1.25 V
Minimum Voltage Range Accuracy 740 µV
Minimum Voltage Range Sensitivity 68.8 µV
Number of Ranges 4
Simultaneous Sampling Yes
On-Board Memory 32 MB
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 8
Input-Only Channels 0
Output-Only Channels 0
Timing Hardware
Maximum Clock Rate 10 MHz
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Maximum Input Range 0 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 2
Number of DMA Channels 1
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 20 MHz
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 100 ppm
Logic Levels TTL
Physical Specifications
Length 31.2 cm
Width 10.6 cm
I/O Connector 68-pin male SCSI-II type
Timing/Triggering/Synchronization
Triggering Digital , Analog
Synchronization Bus (RTSI) Yes

NI PCI-6132 Complete Package

Each NI PCI-6132 requires:
1 Connector Block 1 Cable NI PCI-6132 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6132 and Accessories

Hardware Subtotal: $ 2,523
NI PCI-6132 - 779422-01 Qty $ 2,020 each
Required Accessories
Connector Block - BNC Terminal
BNC-2110 - 777643-01
Qty $ 369 each
Cable - Shielded
SH68-68-EP Cable (2m) - 184749-02
Select length:
Qty $ 134 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show

Software

Software Subtotal: $ 0
Note : You should only purchase this device without software if you already own compatible application software. [View Full List]
NI Developer Suite Core for Windows (English) , 1 year SSP Qty $ 5,299 each
Change Software
Learn about all compatible software and get recommendations based on your needs.
Estimated Shipping Days: 5 - 10
Package Price: $ 2,523
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »