The National Instruments PCI-6533 (DIO-32HS) is a high-speed, 32-bit, parallel digital I/O interface for PCI. The NI PCI-6533 incorporates the NI DAQ-DIO ASIC, a 32-bit general-purpose digital I/O interface specifically designed to deliver high performance on plug-in digital I/O boards. This device performs single-point I/O, pattern I/O, and high-speed data transfer using a wide range of handshaking protocols at speeds up to 76 MB/s. You can operate the 32 lines as individually configurable single-line I/O, or as 8, 16, or 32-bit ports for pattern I/O and handshaking.
NI measurement services software is shipped with the NI 6533 for added value and ease of use. Bundled with the NI-DAQmx driver is Measurement & Automation Explorer, a utility that simplifies hardware configuration with device test panels, interactive measurements, and scaled I/O channels.
For a comparable low-cost digital device with higher throughput and performance, consider the 25 MHz PCIe-6536 (up to 100 MB/s), or the 50 MHz PCIe-6537 (up to 200 MB/s).
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
