- 4 channels of 16-bit simultaneously sampled analog input
- Plug-and-play connectivity via USB
- Sampling rates at 100 kS/s per channel
- Small, portable devices (12.1 by 8.6 by 2.5 cm)
- Includes NI-DAQmx driver software and LabVIEW SignalExpress LE for Windows
- Includes NI-DAQmx Base driver software for Linux® and Mac
 Data Sheet
The NI USB-9215A data acquisition module features integrated signal conditioning that provides plug-and-play connectivity via USB for faster setup and measurements. It offers four channels of simultaneously sampled voltage inputs with 16-bit accuracy to provide minimal phase delay when scanning multiple channels. With both screw-terminal and BNC connector options, the USB-9215A is designed for flexible and low-cost signal wiring. In addition, this module includes 250 Vrms channel-to-earth ground isolation for safety, noise immunity, and high common-mode voltage range.
This USB data acquisition module is compatible with Microsoft Windows OSs when using NI-DAQmx driver software, and Mac OS X and Linux OSs when using NI-DAQmx Base driver software. This USB data acquisition module is not compatible with the Traditional NI-DAQ (Legacy) driver.
Every NI USB data acquisition module includes a copy of NI LabVIEW SignalExpress LE for Windows so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, USB data acquisition modules are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW 7.1 Real-Time Module. USB data acquisition modules are also compatible with ANSI C/C++, C#, Visual Studio .NET, and Visual Basic 6.0.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | USB |
|---|
| OS Support | Windows, Linux, Mac OS |
|---|
| Isolation Type | Bank Isolation |
|---|
| Analog Input | |
|---|
| Number of Channels | 4 DI |
|---|
| Sample Rate | 100 kS/s/ch |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | Yes |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 0.14 V |
|---|
| Minimum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 0.14 V |
|---|
| Number of Ranges | 1 |
|---|
| On-Board Memory | 0 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 0 |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 0 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Physical Specifications | |
|---|
| Length | 14 cm |
|---|
| Width | 8.6 cm |
|---|
| Height | 2.5 cm |
|---|
| I/O Connector | BNC connectors, Screw terminals |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
