Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9265

4-Channel, 100 kS/s, 16-Bit, 0 to 20 mA Analog Output Module

  • 0 to 20 mA output range, 16-bit resolution
  • Open-loop detection with interrupt, 0.0 mA power-on
  • Hot-swappable operation
  • 4 analog outputs, 100 kS/s, simultaneously updated
  • -40 to 70 °C operating range
  • NIST-traceable calibration
  • Data Sheet  |  Specifications popup  |   Configure System popup

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
779334-01 NI 9265 -- For price, select country  
Step 2: Select Optional Accessories
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
Screw Terminals
779017-01 NI 9932 Backshell with 10-pos connector block (qty 1)
NI Recommended
-- For price, select country  
Step 3: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The NI 9265 is a 4-channel, 0 to 20 mA, 100 kS/s simultaneously updating C Series analog output module for any NI CompactDAQ or CompactRIO chassis. The NI 9265 is ideal for interfacing and controlling industrial current-driven actuators at high rates. The module has built-in open-loop detection, which generates an interrupt in software when an open loop is detected as well as zeroing outputs to ensure safety and avoid driving actuators at system power-on. The NI 9265 requires a 9 to 36 V external power supply and includes a channel-to-earth-ground double isolation barrier for safety and noise immunity.

Specifications Documents


Specifications Summary


Factory Installation

Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:

  • Installation of all individual hardware and software components as well as full testing to eliminate conflicts
  • Custom documentation plus a custom restore and startup utility
  • 2-year warranty and calibration coverage

This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

  • You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
  • Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
  • View your RMA support request status online
  • Register your product

Technical Support

www.ni.com/support