The NI PXI-4071 is a 7½-digit FlexDMM - a high-performance, 3U PXI Digital Multimeter (DMM) that provides the measurement capability found in two common test instruments, a high-resolution digital multimeter and a digitizer. As a digital multimeter, the NI PXI-4071 delivers fast, accurate voltage measurements from ±10 nV to 1000 V, current measurements from ±1 pA to 3 A, and resistance measurements from 10 µO to 5 GO, as well as takes frequency/period and diode measurements. In the high-voltage, isolated digitizer mode, the PXI-4071 can acquire waveforms at sampling rates up to 1.8 MS/s. Using the analysis functions in NI LabVIEW, you can analyze these waveforms in both the time and frequency domains. The PXI-4071 offers the superior speed, accuracy, and functionality necessary on both the production floor and in R&D.
Integration with PXI Switches Use the PXI-4071 DMM with PXI switches to form a multichannel, high-voltage data acquisition system. You can combine the NI PXI-2584 12-channel, 600 V multiplexer with the PXI-4071 digital multimeter to test fuel cells or battery stacks at up to 500 VDC common-mode isolation. The NI PXI-2527 64-channel, 300 V multiplexer offers a higher-channel-count solution for lower-voltage, high-accuracy measurements. To see more switch configurations, see “PXI Switches” on the Resources tab.
Improve Measurements with Amplifier Accessory The NI PXI-4022 is an accessory module consisting of a high-speed, high-precision amplifier that conditions signals for acquisition by a PXI DMM. With the guarding functionality, you can make 6-wire resistance measurements for resistors connected in parallel on complex printed circuit board. For low-current measurements, the NI PXI-4022 amplifier and high-precision resistors create a feedback current amplifier. This minimizes burden voltages and converts current to voltage, so you can measure picoampere signals with femtoampere noise. To learn more about how to combine this module with a PXI Digital Multimeter, see “PXI-4022 Guard and Current Amplifier” on the Resources tab.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
