Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCIe-6259

16-Bit, 1.25 MS/s (Max), 1 MS/s (Scanning), 32 Analog Inputs

Configure Page for: Print PDF Rich Text
  • National Instruments recommends the NI PCIe-6353 X Series board for all new applications.
View Data Sheet


The NI PCIe-6259 is a high-speed multifunction M Series DAQ board designed for PCI Express. High-speed NI M Series devices incorporate advanced features such as the NI-STC2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. The onboard NI-PGIA 2 amplifier is designed for fast settling times at high-scanning rates, ensuring 16-bit accuracy even when measuring all channels at maximum speeds.

Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional development systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software - LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, ANSI C/C++, and Visual Basic 6.0.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

View Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Name PCIe-6259
Product Family Multifunction Data Acquisition
Form Factor PCI Express
Part Number 779513-01
Operating System/Target Linux , Mac OS , Windows
DAQ Product Family M Series
Measurement Type Quadrature encoder , Digital , Frequency , Voltage
RoHS Compliant Yes
Analog Input
Channels 32 , 16
Single-Ended Channels 32
Differential Channels 16
Resolution 16 bits
Sample Rate 1.25 MS/s
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 1920 µV
Maximum Voltage Range Sensitivity 112 µV
Minimum Voltage Range -100 mV - 100 mV
Minimum Voltage Range Accuracy 52 µV
Minimum Voltage Range Sensitivity 6 µV
Number of Ranges 7
Simultaneous Sampling No
On-Board Memory 4095 samples
Analog Output
Channels 4
Resolution 16 bits
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 2080 µV
Minimum Voltage Range -5 V - 5 V
Minimum Voltage Range Accuracy 1045 µV
Update Rate 2.86 MS/s
Current Drive Single 5 mA
Digital I/O
Bidirectional Channels 48
Input-Only Channels 0
Output-Only Channels 0
Timing Software , Hardware
Maximum Clock Rate 10 MHz
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters Yes
Supports Programmable Power-Up States? Yes
Current Drive Single 24 mA
Current Drive All 400 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Maximum Input Range 0 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 2
Number of DMA Channels 2
Buffered Operations Yes
Debouncing/Glitch Removal Yes
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 80 MHz
Pulse Generation Yes
Resolution 32 bits
Timebase Stability 50 ppm
Logic Levels TTL
Physical Specifications
Length 16.8 cm
Width 9.9 cm
I/O Connector 68-pin VHDCI female
Timing/Triggering/Synchronization
Triggering Digital , Analog
Synchronization Bus (RTSI) Yes

NI PCIe-6259 Complete Package

Each NI PCIe-6259 requires:
2 Connector Block 2 Cables NI PCIe-6259 Software

Roll over icons above to learn why you need each item in the package.

NI PCIe-6259 and Accessories

Hardware Subtotal: $ 2,665
NI PCIe-6259 - 779513-01 Qty $ 1,749 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 319 each
Cables - Shielded
Qty $ 139 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show

Software

Software Subtotal: $ 0
Note : You should only purchase this device without software if you already own compatible application software. [View Full List]
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Change Software
Learn about all compatible software and get recommendations based on your needs.
Estimated Shipping Days: 5 - 10
Package Price: $ 2,665
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

View Pricing and Purchasing Information »

Back to top »