Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

SSR Series Modules

Configure Page for: Print PDF Rich Text
  • Converts AC and DC to TTL logic signals using negative logic
  • Fully encapsulated input and output modules for use with the SSR Series backplane
  • Features optical isolation and voltage turn-off load
Data Sheet

With the SSR Series, a modular approach to digital signal conditioning, you can mix and match signal types in one system. These SSR modules in conjunction with National Instruments DAQ boards can (1) sense AC and DC voltages from field devices and convert them to digital TTL signals, or (2) use TTL digital signals to control field devices and switch signals. Each SSR module is fully encapsulated and plugs into an 8, 16, 24, or 32-slot backplane, or a shielded carrier. Field signals connect to screw terminals on the backplane, making it easy to swap or replace modules. The SSR backplane even has status LEDs for each module, allowing you to visually verify digital signal levels. You can use input modules to monitor the state of a load or a sensor, such as a temperature switch or limit switch. You can use output modules to switch AC and DC loads, such as solenoids, motors, and lamps.

Data Sheet | View Pricing and Purchasing Information »

Part Number Description Est Ship  US Dollars Qty
SSR Series Modules
776238-01SSR-IAC5 Input Module, 120 VAC10 - 15$ 19.00
776238-03SSR-IAC5A Input Module, 240 VACCall$ 19.00
776239-01SSR-IDC5 Input Module, 3 to 32 VDC10 - 15$ 19.00
776240-02SSR-OAC5A Output Module, 240 VAC12 - 20$ 19.00
776240-03SSR-OAC5 Output Module, 120 VAC12 - 20$ 19.00
776241-01SSR-ODC5 Output Module, 3 to 60 VDC10 - 15$ 19.00

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected the United States as the country where you will use the product(s) (change).

Additional Product Information


View Pricing and Purchasing Information »

Specifications Documents


Specifications Summary


View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »