- Single-channel modules for thermocouple and mV inputs
- Thermocouple plugs for direct connectivity (SCC-TC01)
- Onboard thermistor for cold-junction compensation
- Open-thermocouple detection and automatic ground referencing
- 2 Hz lowpass noise filter and instrumentation amplifier
 Data Sheet | Specifications
 |
Configure System
Use SCC Advisor to configure an SCC data acquisition system based on this module.
The National Instruments SCC-TC01 and SCC-TC02 are 1-channel modules for conditioning a variety of thermocouple types, including J, K, T, B, E, N, R, and S, and millivolt inputs with a range of ±100 mV. The NI SCC-TC0x modules include a 2 Hz lowpass noise filter, instrumentation amplifier with a gain of 100, and buffered outputs for maximum scanning rates by an M Series DAQ device. The input circuitry of the SCC-TC0x modules also includes high-impedancebias resistors for open-thermocouple detection, as well as handling both floating and ground-referenced thermocouples. The SCC-TCox modules include an onboard thermistor for cold-junction compensation.
Additional Product Information
Specifications Documents
Specifications Summary
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
