Use SCXI Advisor to configure an SCXI data acquisition system based on this module.
The National Instruments SCXI-1163 has 32 channels of optically-isolated digital outputs, arranged in eight isolated banks of four output lines each. The NI SCXI-1163 interfaces to field digital logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The SCXI-1163 is programmed serially over the SCXIbus. You can, therefore, easily integrate SCXI-1163 modules into existing SCXI systems without additional DAQ devices or cabling. The SCXI-1163 can also operate in parallel mode when cabled directly to a plug-in DIO device.
The SCXI-1600USB data acquisition module can be used in conjunction with this module to create a completely plug-and-play USB data acquisition system. An SCXI chassis is required to house the SCXI-1600 and assorted SCXI modules for a particular system. The SCXI-1000 chassis is capable of holding up to four modules while the SCXI-1001 can hold up to 12.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
