- NI SCXI-1600 (USB) is recommended for controlling this module; also compatible with NI M Series
- 300 Vrms, CAT II working isolation per bank
- 2,300 Vrms transient overvoltage protection
- 8 banks of 4 lines
- NI-DAQmx measurement services software to simplify configuration and measurements
 Data Sheet | Specifications
(2)
 |
Configure System
most popular item(s) |
Use the NI SCXI Advisor to configure an SCXI data acquisition system based on this module.
The NI SCXI-1162 has 32 channels of optically isolated digital inputs, arranged in eight isolated banks of four input lines each. It interfaces to field digital logic signals, such as TTL and CMOS, where high common-mode voltages can be present. The optical isolation of the SCXI-1162 eliminates ground-loop problems and isolates the host computer from damaging voltages. The module is programmed by the data acquisition device serially over the SCXIbus. You can therefore easily integrate SCXI-1162 modules into existing SCXI systems without additional data acquisition devices or cabling. The SCXI-1162 can also operate in parallel mode when cabled directly to a digital I/O device.
The NI SCXI-1600 USB data acquisition module can be used with this module to create a completely plug-and-play USB data acquisition system. An SCXI chassis is required to house the SCXI-1600 and assorted SCXI modules for a particular system. The NI SCXI-1000 chassis is capable of holding up to four modules while the NI SCXI-1001 can hold up to 12.
See the Resources tab for more information about the SCXI-1600, SCXI-1000, and SCXI-1001.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
