NI SCXI-1161General-Purpose Relay Module |
The National Instruments SCXI-1161 is a general-purpose switching module consisting of eight independent SPDT (also called Form C) nonlatching relays. They can switch up to 8 A at 125 Vrms, 6 A at 250 Vrms, or 5 A at 30 VDC, making them suitable for higher power applications. Each channel has a normally closed (NC), normally open (NO), and common (COM) terminal. You can use two or more NI SCXI-1161s (and SCXI-1160s) in the same chassis with a single DAQ device or switch controller. The DAQ device controls these SCXI modules through serial communication over the SCXIbus in the backplane of an SCXI chassis. The NI 4021 switch controller or the NI 40470/4060 DMMs control these SCXI modules via the SCXI-1362 cable assembly. You have selected the United States as the country where you will use the product(s) (change).
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI SCXI-1161.
Driver Software |

