The National Instruments PXI-6143 S Series multifunction data acquisition (DAQ) module combines the latest in low-cost PC technologies to deliver simultaneous sampling for data acquisition and control systems requiring high-channel counts. A dedicated analog-to-digital converter (ADC) per channel allows for maximum device throughput and higher multichannel accuracy. With 250 kS/s per-channel sampling rates, two 24-bit counter/timers, and eight digital I/O lines, the NI PXI-6143 can be used in a variety of applications, including:
- High-speed, continuous data logging
- Transient and ballistics measurements
- Radar, sonar, ultrasound
- High-energy physics
- IF digitization
The PXI-6143 provides a very low cost per channel while maintaining high dynamic accuracy and simultaneity. These modules are also useful for OEM applications that require more than one channel and higher throughput per channel than a multiplexed architecture can provide.
Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.
For additional information and related products, visit the Resources tab.
The mark LabWindows is used under a license from Microsoft Corporation.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
