The National Instruments PXI-6133 S Series multifunction data acquisition (DAQ) module features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy. With 3 MS/s per-channel sampling rates, four input ranges from ±1.25 to ±10 V, two 24-bit counter/timers, and eight hardware-timed digital I/O lines, the NI PXI-6133 can be used in a variety of applications, including:
- High-speed, continuous data logging
- Transient and ballistics measurements
- Radar, sonar, ultrasound
- High-energy physics
- IF digitization
Enable Warp Mode to Achieve Maximum Sampling Rates
PXI-6133 analog inputs sample up to 2.5 MS/s using the onboard sample clock; they can also sample up to 3 MS/s using one of the onboard counters or an external reference as the sample clock. Download the LabVIEW example from the Resources tab to enable warp mode and achieve the maximum sampling rates.
Direct Connectivity
The NI TB-2709 provides direct SMB connectivity to the eight PXI-6133 analog inputs. There is also one SMB connector that is programmable for analog or digital triggering, counter/timer functionality, or digital signal routing for device synchronization. In addition to the nine SMB connectors, you can use the MFIT-Pigtail cable to an auxiliary connector for access to onboard counters and digital I/O lines.
Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
For related products and the warp mode example program, visit the Resources tab.
The mark LabWindows is used under a license from Microsoft Corporation.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
