- 16 or 18-bit, up to 1.25 MS/s, up to 80 analog inputs
- Up to 4 analog outputs at 16-bit, 2.8 MS/s (4 µs full-scale settling)
- Up to 48 digital I/O lines (up to 32 hardware-timed at 10 MHz)
- Two 32-bit, 80 MHz counter/timers
- NI-MCal calibration technology for up to 5x improved measurement accuracy
- NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software
National Instruments M Series multifunction data acquisition (DAQ) combines analog input, analog output, digital I/O, and counter/timers on a single device. With new, innovative analog and digital designs, M Series devices set a new standard for performance, I/O capability, safety, and value. NI-MCal technology ensures accurate analog measurements at all signal ranges by compensating for nonlinearity error during self-calibration. The NI-PGIA 2 custom instrumentation class amplifier provides true 16-bit resolution at 1 MS/s scan rates and low settling times. The NI-STC 2 system timing controller implements timing and synchronization between onboard subsystems and other devices in the same system. And, with new high-speed digital isolators, industrial M Series devices offer increased accuracy and safety by removing ground loops and rejecting high common-mode voltages.
|
