Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI DAQCard-6024E (for PCMCIA)

200 kS/s, 12-Bit, 16 Analog Input Multifunction DAQ

Configure Page for: Print PDF Rich Text
  • Consider the NI USB-6251 for 1.25 MS/s, 16-bit analog input; built-in connectivity; and more
  • Two 12-bit analog outputs, 8 digital I/O lines, two
    24-bit counters
  • Use with the LabVIEW PDA Module for handheld data acquisition applications
  • NIST-traceable calibration and more than 70 signal conditioning options
  • Superior LabVIEW, LabWindows™/CVI, and Measurement Studio integration for VB and VS .NET
  • Included NI-DAQmx driver software and additional measurement services
Compare to similar products on graph  |  table
Data Sheet

For laptop-based measurements, National Instruments recommends the NI DAQPad-6015 for USB and NI-DAQmx driver software.

The National Instruments DAQCard-6024E delivers low-cost, high-performance E Series technology to laptop and handheld devices that have a PCMCIA (PC Card) slot. You get up to 200 kS/s, 12-bit resolution on 16 single-ended analog inputs. Depending on your system, the NI DAQCard-6024E can stream to disk at rates up to 200 kS/s. It has digital triggering; two 12-bit analog outputs; two 24-bit, 20 MHz counter/timers; and eight digital I/O lines.

Note for Windows Vista Users
DAQCard (PCMCIA) support for Windows Vista is not available for NI data acquisition devices. For laptop-based measurements with 16-bit resolution, please consider NI M Series for USB.

The mark LabWindows is used under a license from Microsoft Corporation.

Data Sheet | View Pricing and Purchasing Information »

NI DAQCard-6024E Complete Package

Each NI DAQCard-6024E requires:

1 Connector Block   1 Cable  NI DAQCard-6024E Software

Roll over icons above to learn why you need each item in the package.

NI DAQCard-6024E and Accessories

Hardware Subtotal: $ 1,377
NI DAQCard-6024E - 778269-01 Qty $ 949 each
Connector Block - Screw Terminal
SCB-68 - 776844-01
 Qty $ 299 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Cable - Shielded
SHC68-68-EP (2m) - 186838-02
 Qty $ 129 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0
NI LabVIEW Full Development System for Windows (English) - 776670-35 Qty $ 2,599 each
Note : You should only purchase this device without software if you already own compatible application software. View Compatible Application Software | Compare to LabVIEW SignalExpress Limited Edition [Close]
Note : This software is required to use LabVIEW Application Builder for Windows. You should purchase LabVIEW Application Builder for Windows without a LabVIEW Development System only if you already own LabVIEW Base or Full for Windows version 8.6.1 or later. Upgrade Your Development System Now [Close]
LabVIEW Application Builder for Windows (English) - 776675-35 Qty $ 999 each
Note : NI recommends this software for use with your hardware to maximize your productivity. [Close]
Change Software
Learn about other compatible software, OS, and language options.
Estimated Shipping Days:
Package Price: $ 1,377
  Add to Cart >>
Guarantee your price for 30 days (learn more)Instant Quote
 
Save for Later

You have selected United States as the country where you will use this product(s) (change)

Specifications Documents


Specifications Summary

General
Product Name DAQCard-6024E
Product Family Multifunction Data Acquisition
Form Factor PCMCIA
Operating System/Target Pocket PC , Windows
DAQ Product Family E Series
RoHS Compliant No
Analog Input
Channels 16 , 8
Single-Ended Channels 16
Differential Channels 8
Resolution 12 bits
Sample Rate 200 kS/s
Max Voltage 10 V
Maximum Voltage Range -10 V , 10 V
Maximum Voltage Range Accuracy 19.112 mV
Minimum Voltage Range -50 mV , 50 mV
Minimum Voltage Range Accuracy 0.119 mV
Number of Ranges 4
Simultaneous Sampling No
On-Board Memory 2048 samples
Analog Output
Channels 2
Resolution 12 bits
Max Voltage 10 V
Maximum Voltage Range -10 V , 10 V
Maximum Voltage Range Accuracy 10.568 mV
Minimum Voltage Range -10 V , 10 V
Minimum Voltage Range Accuracy 10.568 mV
Update Rate 1 kS/s
Current Drive Single 5 mA
Current Drive All 10 mA
Digital I/O
Bidirectional Channels 8
Input-Only Channels 0
Output-Only Channels 0
Number of Channels 8 , 0 , 0
Timing Software
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sourcing , Sinking
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range 0 V , 5 V
Maximum Output Range 0 V , 5 V
Counter/Timers
Counters 2
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 0 V , 5 V
Max Source Frequency 20 MHz
Minimum Input Pulse Width 10 ns
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 100 ppm
Logic Levels TTL
Physical Specifications
Length 8.56 cm
Width 5.4 cm
Height 0.5 cm
I/O Connector 68-pin VHDCI female

View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »