NI cFP-DIO-55016-Channel Digital Input/Output Module for Compact FieldPoint |
The National Instruments cFP-DIO-550 is an 8-channel digital input/output module. It can measure eight digital inputs with a range of 11 to 30 VDC and source eight outputs from 10 to 30 VDC with 250 mA per channel. The main benefit of this module is that it offers both digital input and digital output channels, effectively replacing two modules with one (DI + DO). This module provides 250 V CAT II safety isolation to backplane, and discrete sensor and actuator interfacing. This module also offers a user-selectable input filter to rejects noise, and has a range of 1 µs to 65 ms. Customers can also configure the module so that digital outputs turn on only when the states of digital input channels match specific patterns.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related InformationSystem Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI cFP-DIO-550.
Driver Software |
|||||||||||||||||||
