Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2586

10-Channel, 12 A SPST (Form A) Relays

Configure Page for: Print PDF Rich Text
  • 10 independent SPST relays
  • 65 cycles/s scanning speed
  • 300 VDC/300 VAC CAT II
  • 12 A switching/12 A carry
  • Fully software programmable
  • Data Sheet  |   Configure System popup

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
778572-86 NI PXI-2586 -- For price, select country  
Step 2: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779168-01 Connector and Backshell for PXI-258x Switches -- For price, select country  
Software
778546-09 NI Switch Executive Development System + 1 Yr SSP -- For price, select country  
Step 3: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The National Instruments PXI-2586 is a high-power, general-purpose switch in a single-slot, 3U PXI module. It has 10 independent SPST (Form A) relays with low contact resistance and high isolation voltage. The NI PXI-2586, rated for both high currents (up to 12 A) and high voltages (up to 300 VDC/300 VAC), is ideal for switching power signals and loads in control applications and battery, power supply, and automotive testing.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents


Specifications Summary

General 
Form FactorPXI
OS SupportWindows, Real-Time, Linux
LabVIEW RT SupportYes
Switch TypeGeneral-Purpose Relay
Relay TypeElectromechanical
ConnectivityBack Shell Connector
Product CertificationsC-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety
Input Characteristics 
Number of Relays10 SPST (open)
Maximum Switching Voltage DC (Pollution Degree 2)300 VDC
Maximum Switching Voltage AC300 Vrms
Maximum Switching Current12 A
Maximum Carry Current12 A
Maximum Switching Power100 W
Bandwidth20 MHz
Relay Count TrackingYes
Voltage CategoryCAT II
Path Resistance (Typical)50 mOhm
Dynamic Characteristics 
Mechanical Relay Life1 x 108 cycles
Scan Rate65 cycles/s
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)Yes
TriggeringDigital
External ClockingNo
Physical Specifications 
Length16 cm
Width10 cm
Height2 cm
I/O Connector20-pin Positronic plug

View Pricing and Purchasing Information »

Factory Installation

Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:

  • Installation of all individual hardware and software components as well as full testing to eliminate conflicts
  • Custom documentation plus a custom restore and startup utility
  • 2-year warranty and calibration coverage

This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

  • You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
  • Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
  • View your RMA support request status online
  • Register your product

Technical Support

www.ni.com/support

View Pricing and Purchasing Information »

Back to top »