Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-DIO-96

96 Ch, 5 V TTL/CMOS Digital I/O (2.5 mA)

Configure Page for: Print PDF Rich Text
  • For new applications, consider the NI PCI-6509 (96-channel DIO) with NI-DAQmx driver.
  • Unidirectional and bidirectional I/O
  • Known power-up state
  • 2-wire handshake capability
  • NI-DAQmx driver simplifies configuration and measurements
Data Sheet  |  Specifications   popup


For new applications, consider the NI PCI-6509 industrial 96-channel digital I/O board. The PCI-6509 offers equivalent or improved functionality for most applications. For applications that require Traditional NI-DAQ (Legacy) support or onboard pull-up resistors, select the NI PCI-DIO-96 96-channel parallel digital I/O board for computers with PCI.

The PCI-6509 includes industrial features such as programmable power-up states for outputs, digital change detection, programmable input filters, and digital I/O watchdogs.

The PCI-DIO-96 uses four 24-bit programmable peripheral interfaces (PPIs). You can divide each PPI into three eight-bit ports. The PCI-DIO-96 is flexible for interfacing to peripherals or other computers. It can operate in either a unidirectional or bidirectional mode and handshake with peripheral equipment.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-DIO-96 Complete Package

Each NI PCI-DIO-96 requires:
1 Connector Block 1 Cable NI PCI-DIO-96 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-DIO-96 and Accessories

Hardware Subtotal: $ 1,066
NI PCI-DIO-96 - 777387-01 Qty $ 540 each
Connector Block - Screw Terminal
SCB-100 - 776990-01
Qty $ 330 each
Cable - Shielded
SH100-100-F Cable (2m) - 185095-02
Select length:
Qty $ 196 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0
Note : You should only purchase this device without software if you already own compatible application software.
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Estimated Shipping Days: 1 - 3
Package Price: $ 1,066
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »