- 9 kHz to 100 MHz sine wave generation
- ±0.2 dB flatness across sine wave passband (9 kHz to 100 MHz)
- 12-bit amplitude resolution
- DC to 100 MHz clock generation
- 1.07 µHz frequency resolution
 Data Sheet |
Configure System 
View Diagram 
Select one of the following options for product configuration and pricing:
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The National Instruments PXI-5404 is a 100 MHz frequency generator packaged in 1-slot PXI module. It is capable of generating sine and clock outputs simultaneously at up to 100 MHz with 1.07 µHz resolution. By using direct digital synthesis (DDS) and precise phase-lock loop circuitry, the NI PXI-5404 can generate stable, accurate sine and clock outputs. You can programmatically adjust the amplitude, frequency, and phase of the sine and clock outputs and the duty cycle of the clock output.
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PXI |
|---|
| OS Support | Windows, Real-Time, Linux |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 0 |
|---|
| Analog Output | |
|---|
| Number of Channels | 1 |
|---|
| Timing | Hardware |
|---|
| Update Rate | 300 MS/s |
|---|
| Frequency Range | 0..105 MHz |
|---|
| Resolution | 12 bits |
|---|
| Output Impedance | 50 Ohm |
|---|
| Maximum On-Board Memory | 0 kB |
|---|
| Maximum Voltage Range | -1..1 V |
|---|
| Range Sensitivity | 20 mV |
|---|
| Minimum Voltage Range | -0.5..0.5 V |
|---|
| Range Sensitivity | 10 mV |
|---|
| Waveform Types | Standard Functions, Intermediate Frequency |
|---|
| Provides Data Bit Marker? | No |
|---|
| Supports Linking/Looping Segments? | No |
|---|
| Supports Frequency Hopping and Sweeping? | No |
|---|
| Supports Data Streaming? | No |
|---|
| Supports On-the-fly signal adjustments? | No |
|---|
| Dynamic Range | -55 dBFS |
|---|
| Noise Floor (@ -50 dBm output) | -125 dBm/Hz |
|---|
| Digital I/O | |
|---|
| Number of Channels | 0 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| T-clock Capability | No |
|---|
| Triggering | Digital |
|---|
| External Clocking | Yes |
|---|
| Physical Specifications | |
|---|
| Length | 21.6 cm |
|---|
| Width | 13 cm |
|---|
| Height | 2 cm |
|---|
| I/O Connector | SMB male |
|---|
Factory Installation
Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
- Installation of all individual hardware and software components as well as full testing to eliminate conflicts
- Custom documentation plus a custom restore and startup utility
- 2-year warranty and calibration coverage
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
