NI 9215 ±10 V, Simultaneous Analog Input, 100 kS/s, 4 Ch Module

  • Print
  • PDF
  • Rich Text
  • 4 differential channels, 100 kS/s per channel sample rate
  • ±10 V measurement range, 16-bit resolution
  • 250 Vrms channel-earth, CAT II (screw terminal), or 60 VDC channel-earth, CAT I (BNC) isolation
  • 10-position screw-terminal or BNC connectors available
  • -40 °C to 70 °C operating, 5 g vibration, 50 g shock
  • Configure Complete CompactRIO or NI CompactDAQ System
  • View Data Sheet
  • View Support Resources
The NI 9215 module for use with NI CompactDAQ and CompactRIO chassis includes four simultaneously sampled analog input channels and successive approximation register (SAR) 16-bit analog-to-digital converters (ADCs). The NI 9215 contains NIST-traceable calibration, a channel-to-earth ground double isolation barrier for safety and noise immunity, and high common-mode voltage range.

Recommended Accessories
-NI 9927 strain relief and operator protection (for screw-terminal variant)

Optional Accessories
-NI 9936 extra screw-terminal block (for screw-terminal variant)
-NI 9980 spring-terminal block (for screw-terminal variant)
Note: The NI 9980 is not compatible with the NI 9927 and must be used with low- or non-hazardous voltages or installed in a properly rated enclosure.
-BNC male to BNC male cables, 4 pack (2 m; for BNC variant)

Box Contents
-1 NI 9215 C Series module
-1 NI 9215 Operating Instructions and Specifications manual
-1 NI 9936 10-position screw-terminal connector (for screw-terminal variant)

View Data Sheet | View Pricing and Purchasing Information

Specifications Documents

  • View Data Sheet

Specifications Summary

Loading....

NI 9215 Module Packages

To use the NI 9215 Module , you need all items in the diagram below. Select Option 1 if you already own a C Series System, or Option 2 if you do not already own a chassis, controller, or software.

Roll over the icons below to learn why you need each item in the system

C Series System

1 Connectivity Accessories

NI 9215 Module

Chassis

Controller

Software

NI 9215 Module and Accessories Only
NI 9215 Module
- 779011-01 Qty $ 540 each
- 779138-01 Qty $ 540 each
Required Accessories
Connectivity Accessories -
Qty $ 30 each
Optional Accessories
Connector Block
Qty $ 53 each
Qty $ 63 each
Qty $ 290 each

Package Price: $ 570

Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote

Select a Platform and Configure a System

Create a complete system with the NI 9215 Module and its accessories. However, the NI 9215 Module is compatible with multiple C Series Platforms, NI CompactDAQ and CompactRIO. Please review the comparison information below and select a platform to begin configuring your system.

Configure System Configure System

NI CompactDAQ NI CompactRIO
video
video
Mixed-Measurement Data Acquisition


Learn more

Time-Critical Control & Monitoring


Learn more

Features NI CompactDAQ NI CompactRIO
USB, Wi-Fi, Ethernet, Headless Operation Ethernet, Headless Operation
Up to -40 to 70 C
Up to 50 g shock and 5 grms operational vibration
Up to -40 to 70 C
Up to 50 g shock and 5 grms operational vibration
LabVIEW, LabVIEW Real-Time, C, C++, VB.NET, C#.NET LabVIEW, LabVIEW Real-Time, LabVIEW FPGA, C, C++
NI-DAQmx driver; configuration and troubleshooting tools; short time to first measurement NI-RIO driver; flexibility and customizabilty
PC-based data acquisition; embedded data-logging; portable and benchtop Single-point acquisition; closed-loop control; deterministic operation

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

Additional Product Information

  • View Data Sheet