The NI PXI-1052 is a 4-slot PXI chassis with 8 slots for SCXI modules. The chassis is ideal for DAQ systems requiring multiplexing, signal conditioning, filtering, isolation, amplification, switching, and more. It offers quieter operation with acoustic emissions as low as 42 dBA, and a 0 to 55 °C temperature range. The PXI-1052 provides a solution for PXI customers who need signal conditioning integrated into one PXI chassis.
Remote Power Inhibit Control and Voltage Monitoring
Yes
Total Available Power
450 W
Input Voltage Range
100 V
,
240 V
Input Frequency Range
50 Hz
,
60 Hz
Field-replaceable Power Supply
No
Auto Fan Sound Pressure Level
41.6 dBA
Auto Fan Sound Power
51.9 dBA
High Fan Sound Pressure Level
51.5 dBA
High Fan Sound Power
60 dBA
Auto/High Fan Selector
Yes
Number of Fans
1
Fan Capacity
115 cfm
Per-slot Cooling Capacity
115 cfm
Physical Specifications
Length
45.29 cm
Width
43.82 cm
Height
17.7 cm
I/O Connector
BNC connectors
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
55 °C
Maximum Altitude
2000 m
You have selected United States as the country where you will use the product(s)
(change).
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
