- Scheduled for obsolescence. For new designs, consider the NI USB-6251 BNC.
- Two 16-bit analog outputs; 8 digital I/O lines; two
24-bit counters; analog triggering - NIST-traceable calibration certificate and more than 70 signal conditioning options
- Included Traditional NI-DAQ (Legacy) driver software
- Superior LabVIEW, LabWindows/CVI, and Measurement Studio integration for VB and VS .NET
 Data Sheet- New! Compare to similar products
This device is scheduled for obsolescence. National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. High-speed M Series devices offer a 1.25 MS/s sampling rate, more digital I/O, 32-bit counters, and advanced calibration technology. M Series devices are available in PCI, PXI, PCIe, PXIe, and USB form factors with BNC connectivity.
Add sensor and high-voltage measurement capability to your E Series device with SCC or SCXI signal conditioning. The National Instruments DAQPad-6052E for FireWire combines the 16-bit measurement capability of NI 6052E devices with the high bandwidth of the IEEE 1394 (FireWire) communication bus to provide a portable, 16-bit, full-featured product. It is available in two configurations, both of which feature 250 V functional isolation from your PC and a low-profile package that fits under a laptop. The Mass Termination version features a 68-pin shielded connector to connect signals to the SCC signal conditioning enclosure or screw-terminal boxes. The BNC version features shielded BNC connectors for eight differential analog inputs, two analog outputs, and five auxiliary lines. Access to the other signals is via built-in, screw-terminal connections. The BNC version is ideal for applications where portability and quick connectivity are needed, such as in-vehicle automotive testing or laboratory measurements.
Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | FireWire |
|---|
| OS Support | Windows |
|---|
| DAQ Product Family | E Series |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 4.747 mV |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Range Accuracy | 0.035 mV |
|---|
| Number of Ranges | 2 |
|---|
| On-Board Memory | 512 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 1.405 mV |
|---|
| Minimum Voltage Range | 0..10 V |
|---|
| Range Accuracy | 1.176 mV |
|---|
| Current Drive (Channel/Total) | 5 mA/10 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | No |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 30.7 cm |
|---|
| Width | 25.4 cm |
|---|
| Height | 4.3 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type, BNC connectors |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
