- Consider the NI USB-6251 for 1.25 MS/s, 16-bit analog input; built-in connectivity; and more
- 2 analog outputs; 8 digital I/O lines; two 24-bit counters; analog triggering
- Use with the LabVIEW PDA Module for handheld data acquisition applications
- NIST-traceable calibration and more than 70 signal conditioning options
- Superior LabVIEW, LabWindows™/CVI, and Measurement Studio integration for VB and VS .NET
- Included NI-DAQmx driver software and additional measurement services
 Data Sheet- New! Compare to similar products
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
For laptop-based measurements, National Instruments recommends the NI DAQPad-6016 for USB and NI-DAQmx driver software.
The National Instruments DAQCard-6062E delivers E Series performance to laptops and handheld devices that have a PCMCIA (PC Card) slot. You get up to 500 kS/s, 12-bit resolution on 16 single-ended (eight differential) analog inputs. Depending on your system, the NI DAQCard-6062E can stream to disk at rates up to 500 kS/s.
Note to Windows Vista Users
DAQCard (PCMCIA) support for Windows Vista is not available for NI data acquisition devices. For laptop-based measurements with 16-bit resolution, please consider the NI M Series for USB.
The mark LabWindows is used under a license from Microsoft Corporation.
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PCMCIA |
|---|
| OS Support | Windows |
|---|
| DAQ Product Family | E Series |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 500 kS/s |
|---|
| Resolution | 12 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 17.945 mV |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Range Accuracy | 0.113 mV |
|---|
| Number of Ranges | 4 |
|---|
| On-Board Memory | 2048 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 850 kS/s |
|---|
| Resolution | 12 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 10.568 mV |
|---|
| Minimum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 10.568 mV |
|---|
| Current Drive (Channel/Total) | 5 mA/10 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 8.56 cm |
|---|
| Width | 5.4 cm |
|---|
| Height | 0.5 cm |
|---|
| I/O Connector | 68-pin VHDCI female |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
Select your application need to see compatible software options for the NI DAQCard-6062E (for PCMCIA).
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
|
