- Bus-powered carrier for C Series modules
- Works with a subset of modules supported by NI CompactDAQ and CompactRIO
- 0 to 60 °C operating temperature range
- LabVIEW SignalExpress LE data-logging software
The National Instruments C Series USB single module carrier is a low-channel-count, low-cost, and highly portable solution for NI C Series modules. In addition to stand-alone application use, you can deploy the single module carrier as a debugging device for larger systems or use it to prototype sensor connections before you integrate modules into an NI CompactRIO system. You can use the modules that work with the NI USB single module carrier in any C Series chassis such as NI CompactDAQ, CompactRIO, or R Series expansion chassis.
Of the 40 C Series modules, the following work with the single module carrier:
NI 9211 (thermocouple)
NI 9237 (strain and bridge)
NI 9221 (60 V, 8 ch, 12-bit)
NI 9233 (IEPE, accelerometers, and microphones)
NI 9201 (10 V, 8 ch, 12-bit)
NI 9215 (10 V, 4 ch, 16-bit)
NI 9219 (60 V, 4 ch, Universal)
NI 9229 (60 V, 4 ch, 24-bit)
NI 9239 (10 V, 4 ch, 24-bit)
NI 9421 (24 V digital input)
NI 9472 (24 V digital output)
NI 9481 (60 VDC relay, 4 ch)
|
