- 4 analog input channels for ±30 V or ±20 mA
- 1.4 kHz update rate
- 100 mA current input protection and short-circuit protection
- -40 to 70 °C operating range
- 4 analog voltage output channels for 0 to 10 or ±10 V
- 12-bit resolution
- For new designs, NI recommends using the cFP-AIO-610
Important Note: For new designs, National Instruments recommends the cFP-AIO-610.
The National Instruments FP-AIO-610 is an 8-channel, single-ended, combination analog input/analog output module. It can measure four channels of voltage or mA current loops from industrial sensors and transmitters and can output four channels of 0 to 10 or ±10 V to control valves, gauges, and other industrial actuators. The NI FP-AIO-610 has an internal update rate of 1.4 kHz and is ideal for low-channel-count systems or PID control. The module includes overranging and onboard diagnostics to ensure trouble-free installation and maintenance. The module also makes programming easier by automatically scaling and linearizing input and output signals so you avoid the step of converting binary numbers into engineering units in your control or monitoring software. The FP-AIO-610 module is calibrated according to NIST-traceable calibration standards, ensuring accurate and reliable analog measurement and control.
Additional Product Information
Specifications Documents
Specifications Summary
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
