Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2530

128-Channel Multiconfiguration Multiplexer/Matrix Switch

Configure Page for: Print PDF Rich Text
  • 400 mA maximum current
  • Multiplexer – 128x1 (1-wire), 64x1 (2-wire), 32x1 (4-wire), 8 banks of 16x1 (1-wire)
  • 60 VDC or 30 Vrms maximum voltage
  • For parallel operations requiring lower channel count consider the NI PXI-2576
  • 7 multiplexer/matrix configurations
  • Matrix – 4x32 (1-wire), 8x16 (1-wire), and 4x16 (2-wire)
  • 900 channels/s maximum switching speed
Data Sheet  |   Configure System popup

The National Instruments PXI-2530 is a high-density, multiconfiguration multiplexer/matrix switch module. With four multiplexer and three matrix configurations, the NI PXI-2530 is an excellent solution for complex or high-channel-count systems. Multiplexer configurations include 128x1 (1-wire), 64x1 (2-wire), 32x1 (4-wire), or eight banks of 16x1 (1-wire). Matrix configurations include 4x32 (1-wire), 8x16 (1-wire), or 4x16 (2-wire). You can implement these configurations by selecting the appropriate terminal block. With the speed of reed relays, the PXI-2530 is an ideal front-end component for high-speed measurement devices, such as the NI PXI-4070 6½-digit FlexDMM. For parallel operations requiring lower channel count, consider the NI PXI-2576.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
778660-01 NI PXI-2530 5 - 10 $ 1,899.00
Step 2: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
778733-01 NI TB-2630, Terminal Block for NI PXI-2530 as Multiplexer 10 - 15 $ 249.00
778734-01 NI TB-2631,Term Block for NI PXI-2530, 4x32 1W or 4x16 2W Matrix 12 - 20 $ 249.00
778735-01 NI TB-2632, Terminal Block for NI PXI-2530 as 8x16 1W Matrix 12 - 20 $ 249.00
Software
778546-09 NI Switch Executive Development System + 1 Yr SSP 5 - 10 $ 1,199.00
Warranty
960999-03 3 Year Extended Warranty - $ 99.00
Step 3: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General 
Form FactorPXI Platform
PXI Bus TypePXI Hybrid Compatible
OS SupportWindows, Real-Time, Linux
LabVIEW RT SupportYes
Switches 
Switch TypeMatrix, Multiplexer
Relay TypeReed
ConnectivityTerminal Block
Product CertificationsC-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety
Multiplexer Configurations128x1, 1-wire
64x1, 2-wire
32x1, 4-wire
Matrix Configurations4x32, 1-wire
8x16, 1-wire
4x16, 2-wire
Maximum Switching Voltage DC (Pollution Degree 2)60 VDC
Maximum Switching Voltage AC30 Vrms
Maximum Switching Current0.4 A
Maximum Carry Current0.4 A
Maximum Switching Power10 W
Bandwidth15 MHz
Relay Count TrackingYes
Voltage CategoryCAT I
Path Resistance (Typical)2 Ohm
Thermal EMF50 µV
Mechanical Relay Life1 x 1010 cycles
Scan Rate900 cycles/s
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)Yes
T-clock CapabilityNo
TriggeringDigital
External ClockingNo

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Three-year warranty and calibration coverage
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »